When using it, you never have to turn the pea switch on or off by setting the automatic switch to fill the tank. This “pump expert” will automatically turn the motor on and off when the tank is empty or full. In this way, excess follow-up water will not dirty the area below the tank and it will also save the electricity bills of running extra pumps. If you use it, you can see how much ampere load your motor is taking while running on the ampere lamp and you can understand that your motor is taking more or less load according to its capacity. For example, if the capacitor value or voltage decreases, the ampere will draw more, and you can understand this problem yourself. So you can prepare to solve the problem before the pea is finished, which you may not be able to understand by using the normal control box. If it is used in auto isolation, it will not damage the pump if the power line (if it comes and goes) goes off while the pump is running. Because here refrigerator stabilizer technology delay time is used. For example: Parjunto motor will not start after three minutes after the power goes out. So there is no possibility of breaking your pump fan (impeller) due to load shedding and voltage drop. Auto or manual cone to use it, no need to tension the cone if problem occurs. Because without an electrician Parjunto can run the motor unlimitedly with the bypass switch. So there is no possibility of getting confused that you cannot run the motor because of the automatic pump.